In evidenza

 

Alessandro Rivola
List of Papers

Scopus Author ID: 6602444360    ResearcherID: D-2100-2011    Orcid ID: 0000-0003-1062-0847

2017

  • A. Martini, M. Troncossi, A. Rivola, 2017, Applied Sciences, 7(1), pp. 1–13. Leak Detection in Water-Filled Small-Diameter Polyethylene Pipes by Means of Acoustic Emission Measurements. doi: 10.3390/app7010002 (published on line: 22 December 2016).
  • A. Martini, M. Troncossi, A. Rivola, N. Vincenzi, 2017, 9th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques (Surveillance 9), 22-24 May 2017, Fes, Morocco, pp. 1–9. Experimental vibration analysis of a rotary transfer machine for the manufacture of lock components.
  • M. Cocconcelli, M. Troncossi, E. Mucchi, A. Agazzi, A. Rivola, R. Rubini, G. Dalpiaz, 2017, Shock and Vibration, 2017(1), Article ID 5802702, 16 pages. Numerical and Experimental Dynamic Analysis of IC Engine Test Beds Equipped with Highly Flexible Couplings. doi: 10.1155/2017/5802702 (published on line: 9 July 2017).
  • M. Troncossi, A. Rivola, 2017, 25th International Conference Vibroengineering, 30 May-1 June, 2017, Liberec, Czech Republic (Conference Code: 128743). Published in: Vibroengineering PROCEDIA 11, pp. 34–39. ISSN 2345-0533. Experimental HALTs with sine?on-random synthesized profiles. doi: 10.21595/vp.2017.18595
  • Martini, M. Troncossi, A. Rivola, 2017, Journal of Pipeline Systems Engineering and Practice, 8(4), pp. 04017022-1–04017022-10. Vibro-acoustic measurements for detecting water leaks in buried small-diameter plastic pipes.. doi: 10.1061/(ASCE)PS.1949-1204.0000287 (published on line: 31 July 2017).

2016

  • M. Troncossi, Di Sante R., A. Rivola, 2016, Review of Scientific Instruments, 87(10), Article ID 102502, pp. 1–9. Response measurement by laser Doppler vibrometry in vibration qualification tests with non-Gaussian random excitation. doi: 10.1063/1.4964477 (published on line: 12 October 2016).
  • R. Carrabotta, A. Martini, M. Troncossi, A. Rivola, 2016, Optimized Gravity Compensation Solutions for the ANTROP Palletizing Manipulator, Nona Giornata di Studio Ettore Funaioli, 17 Luglio 2015, pp. 99–104. A cura di: U. Meneghetti, V. Parenti Castelli. Ed. Esculapio, Bologna. ISBN 978-88-7488-965-5. doi: 10.6092/unibo/amsacta/5237.
  • A. Martini, M. Troncossi, A. Rivola, 2016, Proceedings of the 8th International Conference on Urban REhabilitation and Sustainability (URES’16), 21-23 October, 2016, Rome (Italy), pp. 1–6. Investigation on the Detection of Water Leaks in Small-Diameter Polyethylene Pipes Using Acoustic Emission Signals. Also published in: WSEAS Transactions on Fluid Mechanics, 11(2016), Art. n. 13, pp. 106-111. ISSN: 1790-5087. E-ISSN: 2224-347X.

2015

  • Carrabotta R., Martini A., Troncossi M., Rivola A., 2015, Proceedings of ECCOMAS Thematic Conference on Multibody Dynamics, June 29-July 2, 2015, Barcelona, Spain, pp. 817–827. Optimal static balancing of a spatial palletizing robot. ISBN 978-84-944244-0-3.
  • A. Martini, M. Troncossi, A. Rivola, 2015, 8th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques (Surveillance 8), 20-21 October 2015, Roanne, France, pp. 1–8. Experimental vibration analysis of an automatic machine for plastic cap assembly.
  • B. Cornelis, A. Steinwolf, M. Troncossi, A. Rivola, 2015, ICoEV 2015 – International Conference on Engineering Vibration, 7-10 September 2015, Ljubljana, Slovenia, pp. 763–772. Paper no. 167. Shaker testing simulation of non-gaussian random excitations with the fatigue damage spectrum as a criterion of mission signal synthesis. ISBN 978-961-6536-97-4.
  • A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2015, Mechanism and Machine Theory, 90(2015), 128–141, Static balancing of a Parallel Kinematics Machine with linear-delta architecture: theory, design and numerical investigation. ISSN 0094-114X. doi: 10.1016/j.mechmachtheory.2015.03.003 (published on line: 31 March 2015). WOS: 000353985200009. Scopus 2-s2.0- 84945749921.
  • A. Martini, M. Troncossi, A. Rivola, 2015, Shock and Vibration, vol. 2015, article ID 165304, pp. 1–13. Automatic leak detection in buried plastic pipes of water supply networks by means of vibration measurements. ISSN 1070-9622. doi: 10.1155/2015/165304. WOS: 000349233100001. Scopus 2-s2.0-84937250311.
  • M. Cocconcelli, M. Troncossi, A. Agazzi, E. Mucchi, R. Rubini, A. Rivola, G. Dalpiaz, 2015, Improvement of the Dynamic Behaviour of a Test Bed Driveline by Numerical and Experimental Investigations, Ottava Giornata di Studio Ettore Funaioli, 18 Luglio 2014, pp. 135–151. A cura di: U. Meneghetti, A. Maggiore e V. Parenti Castelli. Ed. Esculapio, Bologna. ISBN 978-88-7488-871-9. doi: 10.6092/unibo/amsacta/4301.
  • A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2015, Gravity compensation of the Orthoglide 5-axis Parallel Kinematics Machine, Ottava Giornata di Studio Ettore Funaioli, 18 Luglio 2014, pp. 67–73. A cura di: U. Meneghetti, A. Maggiore e V. Parenti Castelli. Ed. Esculapio, Bologna. ISBN 978-88-7488-871-9. doi: 10.6092/unibo/amsacta/4301.

2014

  • M. Troncossi, E. Mucchi, A. Rivola, 2014, ECME 2014 – 5th European Conference of Mechanical Engineering, November 22-24 2014, Florence, Italy, pp. 198–206. Torsional Vibration Analysis of a Test Rig Driveline Equipped with a Flexible Coupling. ISBN 978-960-474-402-2. Recent Advances in Mechanical Engineering Series, vol. 11, ISSN: 2227-4596.
  • A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2014, IMSD2014/ACMD2014 – 3rd Joint International Conference on Multibody System Dynamics - 7th Asian Conference on Multibody Dynamics, June 30-July 3 2014, BEXCO, Busan, Korea, pp. 1–10. Multibody model and simulation of a statically balanced Parallel Kinematics Machine.
  • A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2014, ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis - ESDA2014, June 25-27 2014, Copenhagen, Denmark, pp. 1–8. Paper no. ESDA2014-20449. Static Balancing of a Parallel Kinematics Machine with Linear-Delta Architecture. doi:10.1115/ESDA2014-20449. Scopus: 2-s2.0-84916917523.
  • M. Troncossi, A. Rivola, 2014, ISMA 2014 – International Conference on Noise and Vibration Engineering, 15-17 September 2014, Leuven, Belgium, ISBN 9789073802919, pp. 799–808. Response analysis of specimens excited with non-Gaussian acceleration profiles. Scopus: 2-s2.0-84913530597.
  • M. Troncossi, Di Sante R., A. Rivola, 2014, AIP Conference Proceedings of 11TH International Conference on Vibration Measurements by Laser and Noncontact Techniques-AIVELA 2014: Advances and Applications, 25-27 June 2014, Ancona, Italy, 1600(74), pp. 74–82. Displacement measurement on specimens subjected to non-Gaussian random vibrations in fatigue life tests. doi:10.1063/1.4879570. WOS: 000341380100007. Scopus: 2-s2.0-84903589935.
  • A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2014, INNOROBO 2014 - Workshop on Applications of Parallel and Cable-driven Robots, 18-20 March 2014, Lyon, France, pp. 1–2. Statically Balanced Parallel Kinematics Machines: a Case Study.
  • A. Rivola, M. Troncossi, 2014, Mechanical Systems and Signal Processing, 44(1-2), 5–13. Zebra tape identification for the instantaneous angular speed computation and angular resampling of motorbike valve train measurements. ISSN 0888-3270. doi:10.1016/j.ymssp.2012.11.009 (published on line: 13 February 2013). WOS:000332048300002. Scopus 2-s2.0-84889771966. Special Issue on “Instantaneous Angular Speed (IAS) Processing and Angular Applications”.
  • S. Ricci, M. Troncossi, A. Rivola, 2014, Journal of Computational and Nonlinear Dynamics, 9(1), 011002-(1–10). Modal selection through Effective Interface Mass with application to flexible multibody cranktrain dynamics. ISSN 1555-1423. doi:10.1115/1.4025280 (published on line: 25 September 2013). WOS:000328264800003. Scopus 2-s2.0-84887862450.
  • E. Mucchi, A. Rivola, G. Dalpiaz, 2014, Applied Acoustics, 77, pp. 99–111. Modeling dynamic behavior and noise generation in gear pumps: procedure and validation. ISSN 0003-682X. doi:10.1016/j.apacoust.2013.10.007 (published on line: 14 November 2013). WOS:000329540200013. Scopus 2-s2.0-84888125826.
  • A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2014, Meccanica, 49(3), pp. 601–614. Elastodynamic behaviour of balanced closed-loop mechanisms: numerical analysis of a four-bar linkage. ISSN 0025-6455. doi:10.1007/s11012-013-9815-7 (published on line: 22 October 2013). WOS:000333078800007. Scopus 2-s2.0-84897024621.
  • A. Rivola, M. Troncossi, 2014, Mechanical Systems and Signal Processing, 48(1-2), pp. 325–338. Dynamic analysis of a motorbike engine timing system: Experimental and numerical investigation of the geartrain. ISSN 0888-3270. doi:10.1016/j.ymssp.2014.03.008 (published on line: 12 April 2014). WOS:000338603900022. Scopus 2-s2.0-84901696445.
  • A. Martini, M. Troncossi, A. Rivola, D. Nascetti, 2014, Preliminary investigations on automatic detection of leaks in water distribution networks by means of vibration monitoring. In Advances in Condition Monitoring of Machinery in Non-Stationary Operations, Eds: G. Dalpiaz, R. Rubini, G. D'Elia, M. Cocconcelli, F. Chaari, R. Zimroz, W. Bartelmus, M. Haddar, Lecture notes in Mechanical Engineering, Springer, 2014. ISBN 978-3-642-39347-1, ISSN: 2195-4356, pp. 535–544. doi:10.1007/978-3-642-39348-8_46. WOS: 000334677400046.

2013

  • A. Martini, M. Troncossi, A. Rivola, 2013, Advances in Mechanical Engineering, 2013, pp. 1–10. Elastodynamic effects of mass-balancing: experimental investigation of a four-bar linkage. doi:10.1155/2013/949457. WOS:000327062300001. Scopus 2-s2.0-84888607853.
  • A. Martini, M. Troncossi, A. Rivola, 2013, 7th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques (Surveillance 7), 29-30 October 2013, Chartres, France, pp. 1–9. Vibration monitoring as a tool for leak detection in water distribution networks.
  • M. Troncossi, R. Cipollini, A. Rivola, 2013, 20th International Congress on Sound and Vibration (ICSV20), 7-11 July 2013, Bangkok, Thailand, ISBN: 978-618-551-682-2, ISSN: 2329-3675, pp. 1–8. Experimental Evaluation of the FDS-based Equivalence Approach for the Mission Synthesis in Accelerated Life Tests. Scopus 2- s2.0-84897081983.
  • A. Martini, M. Troncossi, A. Rivola, D. Nascetti, 2013, 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013), 8-10 October 2013, Ferrara, Italy, pp. 1–10. Preliminary investigations on automatic detection of leaks in water distribution networks by means of vibration monitoring. Also published in: “Advances in Condition Monitoring of Machinery in Non-Stationary Operations”, Eds: G. Dalpiaz, R. Rubini, G. D'Elia, M. Cocconcelli, F. Chaari, R. Zimroz, W. Bartelmus, M. Haddar, Springer, 2014. ISBN 978-3-642-39347-1, ISSN: 2195-4356, pp. 535–544. doi:10.1007/978-3-642-39348-8_46.

2012

  • A. Martini, M. Troncossi, A. Rivola, 2012, Feasibility Investigation on Detection of Water Leaks in Pipelines by Means of Vibration Monitoring. Sesta giornata di studio Ettore Funaioli – 16 luglio 2012, pp. 323–332. A cura di: U. Meneghetti, A. Maggiore e V. Parenti Castelli. Ed. Esculapio, Bologna. ISBN 978-88-7488-615-9. http://amsacta.cib.unibo.it/3715/
  • M. Troncossi, E. Gruppioni, A. Rivola, 2012, Assessment of Efficiency and Vibro-Acoustic Behaviour of Prosthesis Prototypes. Proceedings of 15th International Conference on Experimental Mechanics, 22-27 July 2012, Porto, Portugal, ISBN: 978-972-8826-25-3, pp. 425–426.

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

  • G. Dalpiaz, A. Rivola, 2001, Use of inverese-filtering for gear diagnostics. Proceedings of the 4th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, 16-18 October 2001, Compiègne, France, Ed. Société Française des Mécaniciens, Courbevoie, 2, 379-391.

2000

1999

1998

1997

1996

1995

1994

1993

1991

 

Journal Papers

  1. A. Martini, M. Troncossi, A. Rivola, 2017, Applied Sciences, 7(1), pp. 1–13. Leak Detection in Water-Filled Small-Diameter Polyethylene Pipes by Means of Acoustic Emission Measurements. doi: 10.3390/app7010002 (published on line: 22 December 2016).
  2. M. Cocconcelli, M. Troncossi, E. Mucchi, A. Agazzi, A. Rivola, R. Rubini, G. Dalpiaz, 2017, Shock and Vibration, 2017(1), Article ID 5802702, 16 pages. Numerical and Experimental Dynamic Analysis of IC Engine Test Beds Equipped with Highly Flexible Couplings. doi: 10.1155/2017/5802702 (published on line: 9 July 2017).
  3. Martini, M. Troncossi, A. Rivola, 2017, Journal of Pipeline Systems Engineering and Practice, 8(4), pp. 04017022-1–04017022-10. Vibro-acoustic measurements for detecting water leaks in buried small-diameter plastic pipes.. doi: 10.1061/(ASCE)PS.1949-1204.0000287 (published on line: 31 July 2017).
  4. M. Troncossi, Di Sante R., A. Rivola, 2016, Review of Scientific Instruments, 87(10), Article ID 102502, pp. 1–9. Response measurement by laser Doppler vibrometry in vibration qualification tests with non-Gaussian random excitation. doi: 10.1063/1.4964477 (published on line: 12 October 2016).
  5. A. Martini, M. Troncossi, A. Rivola, 2016, Proceedings of the 8th International Conference on Urban REhabilitation and Sustainability (URES’16), 21-23 October, 2016, Rome (Italy), pp. 1–6. Investigation on the Detection of Water Leaks in Small-Diameter Polyethylene Pipes Using Acoustic Emission Signals. Also published in: WSEAS Transactions on Fluid Mechanics, 11(2016), Art. n. 13, pp. 106-111. ISSN: 1790-5087. E-ISSN: 2224-347X.
  6. A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2015, Mechanism and Machine Theory, 90(2015), 128–141, Static balancing of a Parallel Kinematics Machine with linear-delta architecture: theory, design and numerical investigation. ISSN 0094-114X. doi: 10.1016/j.mechmachtheory.2015.03.003 (published on line: 31 March 2015). WOS: 000353985200009. Scopus 2-s2.0- 84945749921.
  7. A. Martini, M. Troncossi, A. Rivola, 2015, Shock and Vibration, vol. 2015, article ID 165304, pp. 1–13. Automatic leak detection in buried plastic pipes of water supply networks by means of vibration measurements. ISSN 1070-9622. doi: 10.1155/2015/165304. WOS: 000349233100001. Scopus 2-s2.0-84937250311.
  8. A. Rivola, M. Troncossi, 2014, Mechanical Systems and Signal Processing, 44(1-2), 5–13. Zebra tape identification for the instantaneous angular speed computation and angular resampling of motorbike valve train measurements. ISSN 0888-3270. doi:10.1016/j.ymssp.2012.11.009 (published on line: 13 February 2013). WOS:000332048300002. Scopus 2-s2.0-84889771966. Special Issue on “Instantaneous Angular Speed (IAS) Processing and Angular Applications”.
  9. S. Ricci, M. Troncossi, A. Rivola, 2014, Journal of Computational and Nonlinear Dynamics, 9(1), 011002-(1–10). Modal selection through Effective Interface Mass with application to flexible multibody cranktrain dynamics. ISSN 1555-1423. doi:10.1115/1.4025280 (published on line: 25 September 2013). WOS:000328264800003. Scopus 2-s2.0-84887862450.
  10. E. Mucchi, A. Rivola, G. Dalpiaz, 2014, Applied Acoustics, 77, pp. 99–111. Modeling dynamic behavior and noise generation in gear pumps: procedure and validation. ISSN 0003-682X. doi:10.1016/j.apacoust.2013.10.007 (published on line: 14 November 2013). WOS:000329540200013. Scopus 2-s2.0-84888125826.
  11. A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2014, Meccanica, 49(3), pp. 601–614. Elastodynamic behaviour of balanced closed-loop mechanisms: numerical analysis of a four-bar linkage. ISSN 0025-6455. doi:10.1007/s11012-013-9815-7 (published on line: 22 October 2013). WOS:000333078800007. Scopus 2-s2.0-84897024621.
  12. A. Rivola, M. Troncossi, 2014, Mechanical Systems and Signal Processing, 48(1-2), pp. 325–338. Dynamic analysis of a motorbike engine timing system: Experimental and numerical investigation of the geartrain. ISSN 0888-3270. doi:10.1016/j.ymssp.2014.03.008 (published on line: 12 April 2014). WOS:000338603900022. Scopus 2-s2.0-84901696445.
  13. A. Martini, M. Troncossi, A. Rivola, 2013, Advances in Mechanical Engineering, 2013, pp. 1–10. Elastodynamic effects of mass-balancing: experimental investigation of a four-bar linkage. doi:10.1155/2013/949457. WOS:000327062300001. Scopus 2-s2.0-84888607853.
  14. E. Mucchi, G. Dalpiaz, A. Rivola, 2011, Meccanica, 46(6), pp. 1191–1212. Dynamic behaviour of gear pumps: effect of variations in operational and design parameters. ISSN: 0025-6455. (published on line: 19 November 2010; doi:10.1007/s11012-010-9376-y)
  15. S. Ricci, M. Troncossi, A. Rivola, 2011, International Journal of Rotating Machinery, vol. 2011, pp.1–9. Model reduction of the flexible rotating crankshaft of a motorcycle engine cranktrain. ISSN: 1542-3034. doi:10.1155/2011/143523
  16. E. Mucchi, G. Dalpiaz, A. Rivola, 2010, Mechanical Systems and Signal Processing, 24(7), pp. 2180–2197. Elastodynamic Analysis of a gear pump. Part II: meshing phenomena and simulation results. doi:10.1016/j.ymssp.2010.02.004 (available online: 12 February 2010). ISSN: 0888-3270.
  17. D. Bruzzi, A. Corbelli, A. Rivola, P. Tortora, G. Camauli, 2010, Tutto Misure, Anno XII, No. 2, Giugno 2010, pp. 123-127. Test di vibrazione condotti sul microsatellite Almasat-1.
  18. D. Bruzzi, A. Corbelli, A. Rivola, P. Tortora, G. Camauli, 2009, Tutto Misure News, Anno XI, No. 3, Dicembre 2009, pp. 1-5. Test di vibrazione condotti sul microsatellite Almasat-1.
  19. A. Rivola, M. Troncossi, G. Dalpiaz, and A. Carlini, 2007, Mechanical Systems and Signal Processing, 21(2), 735-760 (available online: 1 August 2006). Elastodynamic Analysis of the Desmodromic Valve Train of a Racing Motorbike Engine by Means of a Combined Lumped/Finite Element Model.
  20. G. Dalpiaz, A. Rivola, 2000, Mechanism and Machine Theory, 35(11), 1551-1562. A Non-Linear Elastodynamic Model of a Desmodromic Valve Train.
  21. G. Dalpiaz, A. Rivola, R. Rubini, 2000, Mechanical Systems and Signal Processing, 14(3), 387-412. Effectiveness and Sensitivity of Vibration Processing Techniques for Local Fault Detection in Gears.
  22. A. Rivola, P. R. White, 1999, Bulletin S.F.M. Revue Française de Mécanique, 2, 129-136, June 1999, ISSN: 0373-6601. Detecting System Non-linearities by Means of Higher Order Statistics.
  23. A. Rivola, P. R. White, 1998, Journal of Sound and Vibration, 216(5), 889-910. Bispectral Analysis of the Bilinear Oscillator with Application to the Detection of Fatigue Cracks.
  24. M. Amabili and A. Rivola, 1997, Mechanical Systems and Signal Processing, 11(3), 375-390. Dynamic Analysis of Spur Gear Pairs: Steady-State Response and Stability of the SDOF Model with Time_varying Meshing Damping.
  25. G. Dalpiaz and A. Rivola, 1997, Mechanical Systems and Signal Processing, 11(1), 53-73. Condition Monitoring and Diagnostic in Automatic Machines: Comparison of Vibration Analysis Techniques.

 

Papers in International Conferences

  1. A. Martini, M. Troncossi, A. Rivola, N. Vincenzi, 2017, 9th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques (Surveillance 9), 22-24 May 2017, Fes, Morocco, pp. 1–9. Experimental vibration analysis of a rotary transfer machine for the manufacture of lock components.
  2. M. Troncossi, A. Rivola, 2017, 25th International Conference Vibroengineering, 30 May-1 June, 2017, Liberec, Czech Republic (Conference Code: 128743). Published in: Vibroengineering PROCEDIA 11, pp. 34–39. ISSN 2345-0533. Experimental HALTs with sine?on-random synthesized profiles. doi: 10.21595/vp.2017.18595
  3. A. Martini, M. Troncossi, A. Rivola, 2016, Proceedings of the 8th International Conference on Urban REhabilitation and Sustainability (URES’16), 21-23 October, 2016, Rome (Italy), pp. 1–6. Investigation on the Detection of Water Leaks in Small-Diameter Polyethylene Pipes Using Acoustic Emission Signals. Also published in: WSEAS Transactions on Fluid Mechanics, 11(2016), Art. n. 13, pp. 106-111. ISSN: 1790-5087. E-ISSN: 2224-347X.
  4. Carrabotta R., Martini A., Troncossi M., Rivola A., 2015, Proceedings of ECCOMAS Thematic Conference on Multibody Dynamics, June 29-July 2, 2015, Barcelona, Spain, pp. 817–827. Optimal static balancing of a spatial palletizing robot. ISBN 978-84-944244-0-3.
  5. A. Martini, M. Troncossi, A. Rivola, 2015, 8th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques (Surveillance 8), 20-21 October 2015, Roanne, France, pp. 1–8. Experimental vibration analysis of an automatic machine for plastic cap assembly.
  6. B. Cornelis, A. Steinwolf, M. Troncossi, A. Rivola, 2015, ICoEV 2015 – International Conference on Engineering Vibration, 7-10 September 2015, Ljubljana, Slovenia, pp. 763–772. Paper no. 167. Shaker testing simulation of non-gaussian random excitations with the fatigue damage spectrum as a criterion of mission signal synthesis. ISBN 978-961-6536-97-4.
  7. M. Troncossi, E. Mucchi, A. Rivola, 2014, ECME 2014 – 5th European Conference of Mechanical Engineering, November 22-24 2014, Florence, Italy, pp. 198–206. Torsional Vibration Analysis of a Test Rig Driveline Equipped with a Flexible Coupling. ISBN 978-960-474-402-2. Recent Advances in Mechanical Engineering Series, vol. 11, ISSN: 2227-4596.
  8. A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2014, IMSD2014/ACMD2014 – 3rd Joint International Conference on Multibody System Dynamics - 7th Asian Conference on Multibody Dynamics, June 30-July 3 2014, BEXCO, Busan, Korea, pp. 1–10. Multibody model and simulation of a statically balanced Parallel Kinematics Machine.
  9. A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2014, ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis - ESDA2014, June 25-27 2014, Copenhagen, Denmark, pp. 1–8. Paper no. ESDA2014-20449. Static Balancing of a Parallel Kinematics Machine with Linear-Delta Architecture. doi:10.1115/ESDA2014-20449. Scopus: 2-s2.0-84916917523.
  10. M. Troncossi, A. Rivola, 2014, ISMA 2014 – International Conference on Noise and Vibration Engineering, 15-17 September 2014, Leuven, Belgium, ISBN 9789073802919, pp. 799–808. Response analysis of specimens excited with non-Gaussian acceleration profiles. Scopus: 2-s2.0-84913530597.
  11. M. Troncossi, Di Sante R., A. Rivola, 2014, AIP Conference Proceedings of 11TH International Conference on Vibration Measurements by Laser and Noncontact Techniques-AIVELA 2014: Advances and Applications, 25-27 June 2014, Ancona, Italy, 1600(74), pp. 74–82. Displacement measurement on specimens subjected to non-Gaussian random vibrations in fatigue life tests. doi:10.1063/1.4879570. WOS: 000341380100007. Scopus: 2-s2.0-84903589935.
  12. A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2014, INNOROBO 2014 - Workshop on Applications of Parallel and Cable-driven Robots, 18-20 March 2014, Lyon, France, pp. 1–2. Statically Balanced Parallel Kinematics Machines: a Case Study.
  13. A. Martini, M. Troncossi, A. Rivola, 2013, 7th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques (Surveillance 7), 29-30 October 2013, Chartres, France, pp. 1–9. Vibration monitoring as a tool for leak detection in water distribution networks.
  14. M. Troncossi, R. Cipollini, A. Rivola, 2013, 20th International Congress on Sound and Vibration (ICSV20), 7-11 July 2013, Bangkok, Thailand, ISBN: 978-618-551-682-2, ISSN: 2329-3675, pp. 1–8. Experimental Evaluation of the FDS-based Equivalence Approach for the Mission Synthesis in Accelerated Life Tests. Scopus 2- s2.0-84897081983.
  15. A. Martini, M. Troncossi, A. Rivola, D. Nascetti, 2013, 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013), 8-10 October 2013, Ferrara, Italy, pp. 1–10. Preliminary investigations on automatic detection of leaks in water distribution networks by means of vibration monitoring. Also published in: “Advances in Condition Monitoring of Machinery in Non-Stationary Operations”, Eds: G. Dalpiaz, R. Rubini, G. D'Elia, M. Cocconcelli, F. Chaari, R. Zimroz, W. Bartelmus, M. Haddar, Springer, 2014. ISBN 978-3-642-39347-1, ISSN: 2195-4356, pp. 535–544. doi:10.1007/978-3-642-39348-8_46.
  16. M. Troncossi, E. Gruppioni, A. Rivola, 2012, Assessment of Efficiency and Vibro-Acoustic Behaviour of Prosthesis Prototypes. Proceedings of 15th International Conference on Experimental Mechanics, 22-27 July 2012, Porto, Portugal, ISBN: 978-972-8826-25-3, pp. 425–426.
  17. A. Rivola, M. Troncossi, 2011, A practical procedure for angular resampling applied to motion measurements on a motorbike valvetrain. Proceedings of Surveillance 6, Compiègne, France, 25–26 October 2011, pp. 1–10.
  18. R. Cipollini, A. Rivola, 2011, Flexible multibody model of a motorbike timing system. Proceedings of AIMETA 2001, Italian Conference on Theoretical and Applied Mechanics, Bologna, Italy, 12–15 September 2011, ISBN 978-88-906340-1-7, pp. 1–10.
  19. A. Martini, M. Troncossi, A. Rivola, 2011, Experimental and Numerical Analyses of a Mass-Balanced Four-Bar Linkage. Proceedings of ECCOMAS, Multibody Dynamics 2011, Brussels, Belgium, 4 – 7 July 2011, ISBN 978-2-8052-0116-5, pp. 1–17.
  20. S. Ricci, M. Troncossi, A. Rivola, 2010, Component mode selection in flexible multibody dynamics with application to cranktrain modelling. Proceedings of ISMA 2010 – International Conference on Modal Analysis Noise and Vibration Engineering, September 20-22, 2010, Leuven, Belgium, pp. 3047-3060.
  21. S. Ricci, M. Troncossi, A. Rivola, 2010, Flexible multibody modeling of a racing motorcycle cranktrain: model reduction issues. Proceedings of 1st Joint International Conference on Multibody System Dynamics, May 25-27, 2010, Lappeenranta, Finland, pp. 1-10.
  22. A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2009, Modal and Kineto-elastodynamic Analyses of Balanced Four-bar Linkages. Proceedings of ECCOMAS, Multibody Dynamics 2009, Warsaw, Poland, 29 June – 2 July 2009, ISBN 978-83-7207-813-1, pp. 1–20.
  23. A. Martini, M. Troncossi, A. Rivola, 2009Modal and Kineto-elastodynamic Analyses of Flexible-body Mechanisms by Using MD Patran, MD Nastran and MD Adams. Proceedings of VPD 2009 – MSC.Software Virtual Product Development Conference, May 12-13, 2009, Munich, Germany, pp. 20.
  24. M. Troncossi, A. Rivola, 2009Modal parameter estimation of a PVC-product cleaning machine by means of operational modal analysis. Proceedings of IOMAC 2009 – International Operational Modal Analysis Conference, May 5-6, 2009, Ancona, Italy, ISBN 978-88-96225-16-5, pp. 103–110.
  25. M. Milandri, E. Mucchi, A. Rivola, 2008, A Model for the Elastodynamic Analysis of the Geared Timing System of a Motorbike Engine. Proceedings of ISMA 2008 – International Conference on Modal Analysis Noise and Vibration Engineering, September 15-17, 2008, Leuven, Belgium.
  26. M. Troncossi, E. Troiani, A. Rivola, 2008, Proceedings of the 9th Biennial ASME Conference on Engineering Systems Design and Analysis – ESDA2008, July 7-9, 2008, Haifa, Israel, ISBN 0-7918-3827-7, pp. 1–9. Design Optimization of a Laser Cutting Machine by Elastodynamic Modelling. Scopus 2-s2.0-70349102072. Also published in: Automotive Systems; Bioengineering and Biomedical Technology; Computational Mechanics; Controls; Dynamical Systems. ISBN: 978-0-7918-4836-4. Paper no. ESDA2008-59166, Vol. 2, pp. 551-559. doi:10.1115/ESDA2008-59166.
  27. E. Mucchi, A. Rivola, 2007, Influence of Design and Operational Parameters on the Dynamic Behaviour of Gear Pumps. Proceedings of ICSV14 - 14th International Congress on Sound and Vibration, Cairns, Australia, 9-12 July 2007.
  28. D. Moreno, E. Mucchi, G. Dalpiaz, A. Rivola, 2007, Multibody Analysis of the Desmodromic Valve Train of the Ducati MotoGP Engine. Proceedings of ECCOMAS, Multibody Dynamics 2007 - Milano, Italy, 25-28 June 2007.
  29. S. Delvecchio, O. Niculita, G. Dalpiaz, A. Rivola, 2007, Condition Monitoring in Diesel Engines for Cold Test Applications. Part II: Comparison of Vibration Analysis Techniques. Proceedings of COMADEM 2007, International Congress on Condition Monitoring and Diagnostics Engineering Management - Faro, Portugal, 13-15 June 2007, pp. 207-216.
  30. S. Delvecchio, G. Dalpiaz, O. Niculita, A. Rivola, 2007, Condition Monitoring in Diesel Engines for Cold Test Applications. Part I: Vibration Analysis for Pass/Fail Decision. Proceedings of COMADEM 2007, International Congress on Condition Monitoring and Diagnostics Engineering Management - Faro, Portugal, 13-15 June 2007, pp. 197-206.
  31. G. Dalpiaz, G. D’Elia, E. Mucchi, A. Rivola, 2006, Vibro-acoustic measurements for the identification of incoming stall in axial compressor. Proceedings of ISMA 2006 - International Conference on Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, 18-20 September 2006.
  32. A. Rivola, M. Milandri, E. Mucchi, 2006, A Geartrain Model for the Dynamic Analysis of a Motorbike Timing System. Proceedings of ISMA 2006 - International Conference on Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, 18-20 September 2006, pp. 2689-2703.
  33. G. Dalpiaz, E. Mucchi, A. Fernández del Rincon, and A. Rivola, 2005, Experimental validation of a model for the dynamic analysis of gear pumps. Proceedings of NOVEM 2005 - Noise and Vibration: Engineering Methods, 18-21 April 2005, Saint-Raphaël, France.
  34. G. Dalpiaz, A. Fernández del Rincon, E. Mucchi, and A. Rivola, 2004, Model-based Analysis of Dynamic Phenomena in Gear Pumps. Proceedings of the 5th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, 11-13 October 2004, Senlis, France.
  35. G. Benni, A. Rivola, G. Dalpiaz, and E. Mucchi, 2004, A Non Linear Model of the Geartrain of the Timing System of the Ducati Racing Motorbike. Proceedings of the 5th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, 11-13 October 2004, Senlis, France.
  36. A. Rivola, A. Carlini, 2004, A Camshaft Non-Linear Model for the Desmodromic Valve Train Simulation. Proceedings of ISMA 2004 International Conference on Noise & Vibration Engineering, Leuven, Belgium , 20-22 September 2004, pp. 2051-2065.
  37. A. Carlini, A. Rivola, 2003, A non linear elastodynamic model of a camshaft supported by journal bearings. Proceedings of AIMETA'03 - 16th AIMETA Congress of Theoretical and Applied Mechanics, 9-12 September 2003, Ferrara, Italy.
  38. A. Rivola, A. Carlini, 2003, Sistema per l’acquisizione di segnali analogici e digitali su un banco prova di testate motociclistiche Ducati.  Automotive Day 2003, 12 June, 2003, CRF - Orbassano (TO), Italy. Recipient of the “Best NI Automotive Application 2003”.
  39. A. Rivola, A. Carlini, G. Dalpiaz, 2002, Modelling the Elastodynamic Behaviour of a Desmodromic Valve Train. Proceedings of ISMA2002 International Conference on Noise & Vibration Engineering,16-18 September, 2002 - Leuven, Belgium, pp. 1417-1426.
  40. A. Carlini, A. Rivola, G. Dalpiaz, A. Maggiore, 2002, Valve motion measurements on motorbike cylinder heads using high speed laser vibrometer. Proceedings of the 5th International Conference on Vibration Measurements by Laser Techniques, 18-21 June, 2002 - Ancona, Italy, pp. 564-574.
  41. G. Dalpiaz, A. Rivola, 2001, Use of inverese-filtering for gear diagnostics. Proceedings of the 4th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, 16-18 October 2001, Compiègne, France, Ed. Société Française des Mécaniciens, Courbevoie, 2, 379-391.
  42. A. Rivola, 2000, Comparison Between Second and Higher Order Spectra Analysis in Detecting Structural Damages. Proceedings of Seventh International Conference on Recent Advances in Structural Dynamics, 24-27 July 2000, University of Southampton, Southampton, UK, 2, 937-950.
  43. G. Dalpiaz, A. Rivola, 2000, Inverse Problems in Mechaninsms for Packaging Machines. Proceedings of Seventh International Conference on Recent Advances in Structural Dynamics, 24-27 July 2000, University of Southampton, Southampton, UK, 1, 159-172.
  44. G. Dalpiaz, G. Giuliani, A. Rivola, 2000, Proceedings of MATLAB Conference 2000, 8-9 Febbraio 2000, Bologna, Italy. Impiego di SIMULINK per la Simulazione del Comportamento Dinamico di Azionamenti Meccanici. (in Italian)
  45. G. Dalpiaz, G. Giuliani, A. Rivola, 1999, Proceedings of 14th Italian Conference on Theoretical and Applied Mechanics - AIMETA ’99, Como, Italy, October 6-9. Simulazione del comportamento dinamico degli assi di una macchina utensile. (in Italian)
  46. A. Rivola, P. R. White, 1999, Use of Higher Order Spectra in Condition Monitoring: Simulation and Experiments.Proceedings of ASME Design Engineering Technical Conferences, Las Vegas, Nevada, September, 12-16, 1999, DETC99/VIB-8332.
  47. G. Dalpiaz, A. Rivola, 1999, A Model for the Elastodynamic Analysis of a Desmodromic Valve Train. Proceedings of the Tenth World Congress on the Theory of Machines and Mechanisms, June 20 - 24, Oulu, Finland, Oulu University Press, 4, 1534-1542.
  48. A. Rivola, P. R. White, 1998, Detecting System Non-linearities by Means of Higher Order Statistics. Proceedings of the 3rd International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, 13-15/10/1998, Senlis, France, Ed. Société Française des Mécaniciens, Courbevoie, 1, 263-272.
  49. G. Dalpiaz, A. Rivola, R. Rubini, 1998, Gear Fault Monitoring: Comparison of Vibration Analysis Techniques. Proceedings of the 3rd International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, 13-15/10/1998, Senlis, France, Ed. Société Française des Mécaniciens, Courbevoie, 2, 623-637.
  50. A. Rivola, 1997, Atti XIII Congresso Nazionale Associazione Italiana di Meccanica Teorica ed Applicata - AIMETA'97, 29/09-3/10/1997, Siena, Italia, Ed. ETS, Pisa, Italia, 2, 73-80. "Crack Detection by Bispectral Analysis."
  51. G. Dalpiaz, A. Rivola and R. Rubini, 1997, Proceedings of International Conference on Mechanical Transmissions and Mechanisms, MTM '97, 1-4/07/1997, Tianjin, China, China Machine Press, Beijing, 549-553. "A Kineto-Elastodynamic Model of a Gear Testing Machine."
  52. G. Dalpiaz, A. Rivola and R. Rubini, 1996, Proceedings of the Congress of Technical Diagnostics, KDT '96, 17-20/09/1996, Gdansk, Poland, 2, 185-192. "Dynamic Modelling of Gear Systems for Condition Monitoring and Diagnostics."
  53. G. Dalpiaz and A. Rivola, 1995, Proceedings of the 2nd International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, 10-12/10/1995, Senlis, France, Ed. Societé Française des Mécaniciens, Courbevoie, 1, 327-338. "Fault Detection and Diagnostics in Cam Mechanisms."
  54. G. Dalpiaz and A. Rivola, 1995, Proceedings of the Ninth World Congress on the Theory of Machines and Mechanisms, 29/08-2/09/1995, Milano, Italy, Ed. Unicopli Spa, Milano, 1, 327-332. "A Kineto-Elastodynamic Model of a Mechanism for Automatic Machine."
  55. U. Meneghetti and A. Rivola, 1995, Abstracts of International Workshop on Structural Damage Assessment Using Advanced Signal Processing Procedures, 29-31/05/1995, Pescara, Italy. "Crack Localization by Sensitivity Analysis and Accurate Frequency Measurement." (pdf) 
  56. G. Dalpiaz, A. Rivola and U. Meneghetti, 1994, Proceedings of an International Conference on Condition Monitoring, 21-25/03/1994, Swansea, U.K., Ed. M. H. Jones, Pineridge Press, Swansea, 217-228. "Use of Filtering Function for Machine Health Monitoring."

 

Others

  1. R. Carrabotta, A. Martini, M. Troncossi, A. Rivola, 2016, Optimized Gravity Compensation Solutions for the ANTROP Palletizing Manipulator, Nona Giornata di Studio Ettore Funaioli, 17 Luglio 2015, pp. 99–104. A cura di: U. Meneghetti, V. Parenti Castelli. Ed. Esculapio, Bologna. ISBN 978-88-7488-965-5. doi: 10.6092/unibo/amsacta/5237.
  2. M. Cocconcelli, M. Troncossi, A. Agazzi, E. Mucchi, R. Rubini, A. Rivola, G. Dalpiaz, 2015, Improvement of the Dynamic Behaviour of a Test Bed Driveline by Numerical and Experimental Investigations, Ottava Giornata di Studio Ettore Funaioli, 18 Luglio 2014, pp. 135–151. A cura di: U. Meneghetti, A. Maggiore e V. Parenti Castelli. Ed. Esculapio, Bologna. ISBN 978-88-7488-871-9. doi: 10.6092/unibo/amsacta/4301.
  3. A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2015, Gravity compensation of the Orthoglide 5-axis Parallel Kinematics Machine, Ottava Giornata di Studio Ettore Funaioli, 18 Luglio 2014, pp. 67–73. A cura di: U. Meneghetti, A. Maggiore e V. Parenti Castelli. Ed. Esculapio, Bologna. ISBN 978-88-7488-871-9. doi: 10.6092/unibo/amsacta/4301.
  4. A. Martini, M. Troncossi, A. Rivola, D. Nascetti, 2014, Preliminary investigations on automatic detection of leaks in water distribution networks by means of vibration monitoring. In Advances in Condition Monitoring of Machinery in Non-Stationary Operations, Eds: G. Dalpiaz, R. Rubini, G. D'Elia, M. Cocconcelli, F. Chaari, R. Zimroz, W. Bartelmus, M. Haddar, Lecture notes in Mechanical Engineering, Springer, 2014. ISBN 978-3-642-39347-1, ISSN: 2195-4356, pp. 535–544. doi:10.1007/978-3-642-39348-8_46. WOS: 000334677400046.
  5. A. Martini, M. Troncossi, A. Rivola, 2012, Feasibility Investigation on Detection of Water Leaks in Pipelines by Means of Vibration Monitoring. Sesta giornata di studio Ettore Funaioli – 16 luglio 2012, pp. 323–332. A cura di: U. Meneghetti, A. Maggiore e V. Parenti Castelli. Ed. Esculapio, Bologna. ISBN 978-88-7488-615-9. http://amsacta.cib.unibo.it/3715/.
  6. R. Cipollini, A. Rivola, 2011, Flexible multibody modelling of a motorbike timing system as a tool for the engine design optimization. Quinta giornata di studio Ettore Funaioli – 15 luglio 2011, pp. 323–331. A cura di: U. Meneghetti, A. Maggiore e V. Parenti Castelli. Ed. Esculapio, Bologna. ISBN 978-88-7488-516-9. http://amsacta.cib.unibo.it/3310/.
  7. M. Troncossi, A. Rivola, 2010, Experimental Tests of Joint Prototypes for Upper Limb Powered Prostheses. Quarta Giornata di Studio Ettore Funaioli – 16 luglio 2010, pp. 73–82. A cura di: U. Meneghetti, A. Maggiore e V. Parenti Castelli. Ed. Asterisco, Bologna. ISBN 978-88-965720-6-1. http://amsacta.cib.unibo.it/3043/.
  8. S. Ricci, M. Troncossi, A. Rivola, 2009. Development of a flexible multibody model of a motorcycle engine cranktrain, Terza Giornata di Studio Ettore Funaioli – 16 luglio 2009, pp. 89–100. A cura di: U. Meneghetti, A. Maggiore e V. Parenti Castelli. Ed. Asterisco, Bologna. ISBN 978-88-902128-8-8.
  9. M. Troncossi, E. Troiani, A. Rivola, 2009, Design Optimization of a Laser Cutting Machine by Elastodynamic Modelling. Automotive Systems; Bioengineering and Biomedical Technology; Computational Mechanics; Controls; Dynamical Systems. ISBN: 978-0-7918-4836-4. Paper no. ESDA2008-59166, Vol. 2, pp. 551-559. doi:10.1115/ESDA2008-59166.
  10. A. Martini, M. Troncossi, M. Carricato, A. Rivola, 2008. On the elastodynamic behaviour of balanced closed-loop mechanisms: numerical analysis of a four-bar linkage, Seconda Giornata di Studio Ettore Funaioli – 18 luglio 2008, pp. 1–12. A cura di: U. Meneghetti, A. Maggiore e V. Parenti Castelli. Ed. Asterisco, Bologna. ISBN 978-88-86909-53-2.
  11. A. Rivola, 2007. Higher Order Spectral Analysis: a Tool for Fault Monitoring and Diagnostics, Giornata di Studio in onore di Ettore Funaioli – 18 luglio 2007, pp. 203–215. A cura di: Umberto Meneghetti, Alberto Maggiore e Vincenzo Parenti Castelli. Ed. Asterisco, Bologna. ISBN 978-88-902128-9-5.
  12. E. Mucchi, A. Rivola, 2007, Pub. ENDIF, University of Ferrara, No. 156, Aprile 2007, Implementazione di un modello di rigidezza di ingranamento in ambiente Matlab. (in Italian)
  13. E. Mucchi, A. Rivola, 2007, Pub. ENDIF, University of Ferrara, No. 154, Aprile 2007, Analisi modale sperimentale di un componente strutturale di  macchina utensile. (in Italian)
  14. E. Mucchi, A. Rivola, 2007, Pub. ENDIF, University of Ferrara, No. 152, Aprile 2007, Modellazione elastodinamica dell’albero a gomiti di un motore motociclistico Ducati. (in Italian)
  15. A. Rivola, 2000, Pub. DIEM, University of Bologna, No. 107, July 2000. Applications of Higher Order Spectra to the Machine Condition Monitoring.
  16. A. Rivola and U. Meneghetti, 1996, Scritti per Ettore Funaioli, 225-239, Ed. Bologna: Esculapio. "Misurazione Accurata di Frequenze (Accurate Measurement of frequencies)." (in Italian)
  17. A. Rivola and G. Dalpiaz, 1993, Pub. DIEM, University of Bologna, No. 76 Analisi dinamica di un meccanismo per macchina automatica (Dynamic Analysis of a Mechanism for Automatic Machine). (in Italian)